Collomix ROTA X.40, Instructions Manual

Page: 11 / 20

Collomix GmbH ROTA X.40
Version 1.1-20 11
5.5 Trial run
A trial run with an empty mixing container must be conducted when first starting the machine or after
maintenance and repair work in order to check the proper function of the machine.
WARNING
Risk of injury due to protruding parts
Parts may protrude from the equipment.
•
Always work diligently on the equipment and in close proximity of the equipment.
• If the machine is not used and turn it off on the main switch.
6. Operation
Prior to working with the machine, check all parts for their proper condition and function. Do not start
the machine with defective or missing parts.
Check all safety-relevant structural components of the machine for proper function before starting it.
Any defective or damaged parts must be replaced by qualified personnel prior to starting to work with
it.
6.1 Switching on the machine
The machine is turned on using the main switch ⑤ . After an automatic initialisation, clamping plates
② and ③ are moved apart a nd and the door is opened by spring force. On the display ⑦ is shown
START.
Any errors detected during initialisation are shown in text form on the display.
6.2 Load a container
Only use sufficiently stable and tight-closing vessels for mixing. In case of doubt, consult the
manufacturer of the mixing vessels.
To place the container, proceed as follows:

If necessary, unlock and open the door ⑧ by pushing the DOOR button.

Observe the weight and size limits of the mixing vessel. Never overload the machine!

Place the container centrically on the lower clamping plate ② . The handle of the container shall
be backwards to the built-in handle fixation. In case the built-in handle fixation is not working,
please use a tensioning rubber or an adhesive tape to prevent the handle from hurling around
during the mixing.
Never mix a container without proper fixation of the handle.

Use only undamaged containers, never stack containers!

A suitable centering ring is necessary if oval containers are to be mixed!

Several identical containers can be mixed at the same time. Pay attention to a symmetric
arrangement of the containers on the mixing plate.
Place containers always in the centre. Do not stack containers!
Securing the handle with
a rubber band