Page 1 of 2
Short and Long Shelves placed
11/14/21
on the Floor Assembly Instructions
Before assembly place the Support Blocks and Shelves in place on the floor without screws to make sure you see how
they all fit together and how they are attached to the legs and to each other. The Support Blocks are underneath the
Shelves and will not be visible once installation is complete.
The Short Shelf is attached at the short (width) of the bed between the inside of the Legs. The Long Shelf goes the (long)
length of the bed and is attached to either the Short Shelf and/or the inside of the back legs. There are four combinations
of shelves: A: (1) Short Shelf; B: (1) Long Shelf; C: (1) Short Shelf and (1) Long Shelf; D: (2) Short Shelves and (1) Long
Shelf. Follow the diagrams below based on the type and number of shelves you ordered. Supports blocks are attached
with 2-1/2” screws. Shelves are attached with 1-5/8” screws to the Support Blocks.
Install Short Shelf by itself
