Page
1
of
2
Multi-Width Bunk Bed Assembly Instructions
Assembly instructions for Twin/Twin-XL over Full, Twin/Twin-XL over Queen and Full/Full-XL over
Queen bunk bed.
Basically the upper bunk is a Loft Bed with custom notched front legs. Follow the Loft Bed Assembly
Instructions to assemble the upper bunk.
Please note the Back Legs are 5-1/2” wide. The Front
Legs are 5-1/2” wide at the top and notched to be 3-1/2” wide below the Upper Bed Rail.
The
notched front legs will allow the Low Platform Bed to be placed in-between the inside of the legs.
Please make sure when assembling the upper bunk that you place the notched legs on the front.
Loft Bed Assembly Instructions:
https://www.collegebedlofts.com/assembly_instructions.pdf
The bottom bunk is a Low Platform Bed. Follow the Low Platform Bed Assembly Instructions. The
Lower Bunk is a standalone bed that is not attached to the upper bunk. This allows you to be able to
pull out the lower bunk for cleaning underneath.
Low Platform Assembly Instructions:
https://www.collegebedlofts.com/bedsetup/low_platform_assembly.pdf
