Page 1 of 5
Long Desk Assembly Instructions
10/17/18
The Long Desk goes underneath the loft and across the back. Maximum weight capacity is 40 lbs. It comes in 2 pieces
(long and short side) which needs to be glued and assembled prior to attaching to the loft bed.
Before starting assembly wipe away any sawdust that may still be on the desktop pieces.
Long Desktop Parts List
(2) Desktops (2) 2x2x38” Inner Rails 2-1/2” & 1-5/8" Screws (1) Desk Support 2x4 x 76" (regular), 81" (XL)
Step 1
If you have saved the cardboard box the desk came in, you may use underneath the pieces during the gluing process in
case the glue seeps out.
Lay the shortest desktop piece face up as in the picture shown below. Apply glue to center support and support rails.
Spread glue evenly across all pieces.
Diagram-1 – Short Side
Diagram-2 – Underneath View
Note: Arrows represent 2½” screws which go into the side of each piece, X’s represent 1-5/8” screws which attach the
supports to the top piece. Always line up the A|A and B|B when installing the Inner Rail.
