collaxx Bluetooth-Player
mounting and usage manual
Operation hints
Faultless operation of this device can only be guaran-
teed, if the following hints are respected. Since violating
these hints also voids product warranty, it is necessary to
carefully read and respect them.
The device must only be used with the power supply it
was shipped with. Connecting a different or additional
power supply is not necessary and may damage the
device. Changes to the device must not be done. This
may lead to damage of the device or other connected
components. Warranty voids if the enclosure is opened
or the device is exposed to high temperatures or high
humidity.
The device must not be mounted directly inside a sauna,
infrared cabin or steam bath. It is unlike collaxx-
colorlights not made to operate in such environments.
Liquids or conductive materials must not reach the inside
of the device. In case this happens, disconnect the
device immediately. It must be tested, cleaned and
maybe even repaired by an authorized expert.
Do not place heavy things on the device. Transport the
device carefully and do not drop it. Make sure that the
device is mounted properly during operation. People
may be insured otherwise.
Do not operate the device next to strong sources of
interference (e.g.: monitors, microwaves, power
supplies, computers) as this may lead to radio
transmission problems.
Disclaimer
The manufacturer denys liability for wrong or incomplete
information as well as translation mistakes in this
manual.
Product may be subject to changes without notice.
Introduction:
The collaxx Bluetooth-Player is an amplifier with
Bluetooth reception, which provides the possibility to
drive two speakers with a stereo signal. To supply the
device with an audio signal without Bluetooth, the 3.5mm
Line-In connector can be used. Additionally, the audio
signal is permanently output on a 3.5mm Line-Out
connector.
A digital signal processor was integrated into this device,
which will protect and improve the characteristics of
connected speakers. The Line-Out connector will still
always provide the unmodified audio signal.
Usage examples:
As normal Bluetooth-Player:
Cascading multiple Bluetooth-Players to drive more than
two speakers:
Usage without Bluetooth function as pure Line-In
amplifier:
Usage as "Bluetooth to 3,5mm Connector" device:
Master
Slave
