background image

3.

Assemble remaining interlock-
ing shock-corded gray pole.

4.

Fold back vestibule on front of 
tent to locate sleeve on under
side of rainfly. (Fig. 9)

5.

Slide gray pole through sleeve 
in rainfly. (Fig. 9)

STITCH LINE

KVIKA

TM

TENT 8’ X 8’

MODEL 2000001059

Before you begin

Read all instructions before set up.
• Select a level campsite clear of rocks, branches, and other hard

or sharp objects, to install your tent.

WARNING: Keep clear of overhead power lines.

•  Do not set up your tent under trees.
•  For best results in windy conditions, position end of tent into

the wind.

•  Enlist the help of at least one other person to assist you when 

it is time to assemble the tent.

Fig. 2

Fig. 3

To Set Up Tent

1.

Unfold tent and spread out on a clean, level surface with the 
door facing the desired direction. Unzip door. (Fig. 1)

4.

Insert one end of each black pole into 
pins in front corners oftent. (Fig. 3)

5.

Go to opposite end of each pole and gradually apply pressure
to the pole forming an arch. Insert the pin into the pole end 
at the tent corners. 
(Fig. 4)

6.

Stretch corners of 
tent until floor is taut 
then hammer stakes
through loops to 
secure.

Fig. 4

Parts and Components

Description

Part Number

Main Poles, Black (2)

5010000360

Side Poles, Gray (2)

5010000361

Rainfly

5010000362

7.

Attach frame clips along edges 
of tent to black main poles
(Fig. 5)

8.

Assemble first interlocking 
shock-corded, gray pole.

Fig. 5

9.

Slide the gray pole through sleeve on front of tent. (Fig. 6)

Fig. 7

Fig. 6

10.

Pull down on pole and insert into 
center pin location on side of tent. 
(Fig. 7)

11.

Go to opposite side of tent and 
gradually apply pressure to the 
pole to form an arch. Insert the
pin into the pole, then drive stake 
through metal ring to secure.

12.

Attach frame clips on both sides
of tent to gray pole.

To Attach Rainfly

1.

Drape rainfly over tent with vestibule centered over the door 
on the front of tent (Fig 8).

NOTE:

Hook and loop 

fasteners, located on 
seams of underside
of rainfly, should be
centered over black
and gray poles. 

Fig. 10

Fig. 9

To Set Up Tent 

(continued)

(continued on other side)

2

. Assemble main tent poles by interlocking both longer, black 

shock-corded, poles.

3

. Insert black poles through sleeves, with the black seams, in 

top of tent forming an “X” as shown. (Fig. 2)

Fig. 1

Door

Sleeves with
black seams

Fig. 8

Vestibule

on Rainfly

Front on Tent

Sleeve

in Rainfly

2.

Secure rainfly with velcro hook 
& loop fasteners, on underside 
of rainfly, around black poles at 
the back of tent and gray pole 
on both sides. (Fig. 9)

Reviews: