SCREENED WEATHERMASTER
®
ELITE 17'X9'
1
Layout & Positioning of Tent
– Layout and position tent with screen room
facing desired direction. (illus. 1)
– Stake down tent, starting with the corners.
Do not stretch too tight. Angle the stakes
slightly toward the tent. (illus. 2)
Keep the floor taut.
– Stake down the remainder
of the stake loops.
– Unzip the door.
2
Assemble & Place Roof Poles
– Assemble all shock-corded
roof poles. When assembled will
form a continuous arch with both
ends pointing down. (illus. 3)
– Select center curved roof poles,
and insert through the two center
roof sleeves and the front screen
room roof sleeve all with grey
webbing on sleeve ends. (illus. 4)
– Select rear roof pole, (orange
sticker), and insert through the roof
sleeve with orange webbing sleeve
end at rear of the tent. (illus. 4)
When You Are Ready
To Set Up Your Tent
– Select a level campsite
clear of rocks, branches
and other hard or sharp
objects.
– Do not set up your tent
under trees.
– For best results in windy
conditions, position the
end of tent into the wind.
(3) Center Curved Roof Poles
Part No. 5010000474
(1) Rear Pole
(Orange Sticker) Part No. 5010000475
(6) Center Upright Poles
Part No. 5010000477
(1) Vertical Hinge Door Pole (short with
plastic tips) Part No. 5010000479
(1) Hinge Door Pole (long with
plastic tips) Part No. 5010000480
(2) Rear Brace Poles
(Orange Sticker) Part No. 5010000476
Rainfly Part No. 5010000478
Instructions apply to Part Number 2000000146
illus. 3 Curved roof pole assembly.
illus. 4
Curved roof pole system shown
inserted through pole sleeve.
illus. 2
Stake loops
properly staked
Front of
screen
door
Roof sleeve
illus. 1
Roof pole sleeve
Shock-corded poles
Forms an arch
POLE ASSEMBLY PARTS
Color coded
webbing
Color coded
webbing