USER’S GUIDE
ATTENTION!
• Never try to open the case or remove its back cover.
• Do not operate buttons underwater
• Should moisture appear inside the watch, have it
checked immediately by your dealer. Moisture can
cause erosion of the metal parts of the watch.
• The watch is designed to withstand normal use.
Avoid dropping or otherwise abusing the watch.
• Avoid exposing the watch to extreme temperatures.
• Wipe the watch with a dry, soft cloth only. Avoid
direct contact with chemicals that can cause
deterioration of the plastic parts of the watch.
• Avoid wearing the watch in close proximity to
strong magnetic fields or static charge.
• Replacement battery type: CR 1620
DISPLAY
• The screen shown in display layout:
MODE SELECTION
• Press “B” to change modes in the following sequence:
a) Timekeeping mode
b) Alarm mode
c) World time mode
d) Stopwatch mode
MODE INSTRUCTIONS
TIMEKEEPING
• In the timekeeping mode, the month, date and day of
the week are displayed.
1. In the timekeeping mode, press “C” to display the year
instead of the day of the week. Press “C” again to display
the day of the week.
2. Press and hold “B” for 3 seconds to change from 12 to 24
hour format, and vice versa.
Time Setting
1.Press and hold “C” for 3 seconds to enter time setting
mode. Time zone letter choices will start blinking.
2.Press “D” to select time zone: D – pacific time M –
mountain time C – central time E – eastern time
3.Next, press “C” and DST – Daylight Savings time will
begin to flash.
4.Press “D” to change DST from on to off and vice versa.
5.Press “C” to change the “seconds” field.
6.Press “D” to set “seconds” to zero.
7.Repeat steps 5 & 6 to set the following fields in
sequence: Minutes, hours, year, month and date. The
watch will not allow you to change the seconds/ minutes/
hours if the watch has been successfully calibrated in the
last 24 hours.
8.Press “B” to exit time setting function at any point.
ALARM
• The alarm sounds daily at the preset time for 15 seconds.
Press any button to stop the alarm.
• In the alarm mode: press “D” to turn the alarm
ON/OFF alternately. When the alarm is on, a small alarm
icon will appear in the top left area of the display.
Alarm Setting
1.Press “C” to enter alarm setting function. The minutes
field will start blinking.
2.Press “D” to change the minutes. Press and hold to
scroll quickly through numbers.
3.Press “C” to select the hour.
4.Press “D” to change the hours, press and hold to scroll
quickly through numbers.
5.Press “B” to exit the alarm setting function at any point.
Second
Minutes
Date
Month
Hour
WORLD TIME
• In the world time mode, press and hold “D” for 3 seconds
to set Daylight Savings Time (DST) On/Off alternately.
• Press and hold “B” for 3 seconds to change 12H/24H
format. In the 12 hour format, a small A or P icon will be
displayed.
WORLD TIME cont’d
World Time Setting
1.Press and hold “C” for 3 seconds to enter the world
time setting mode.
2.Press “D” to change the time zone displayed. Time
zone is based on GMT (Greenwich Mean Time) +/-
1,2,3 up to 12 hours.
3.Press “C” to set time zone.
4.Press “B” to exit setting at any point.
STOPWATCH
Lap Time
• In stopwatch mode, press “C” to reset to zero.
• Press “D” to start the stopwatch.
• Press “D” again to stop the stopwatch.
Split Time
1. In stopwatch mode, press “D” to start the
stopwatch.
2. Press “C” to display the split time. Stopwatch
continues timing internally
3. Press “C” again to clear the split time and continue
the measurement.
BUTTONS
• Button operations are indicated using the letters as
shown in the illustration.
A. Backlight
C. Reset
B. Mode
D. Set
D. Set
D. Set
D. Set
D. Set
"D"
"C"
"B"
"A"
Day
