Wheel Spacers 2ea. (A)
Key 2ea. (B)
M14Washer 2ea. (C)
M14 Castle nuts 2ea. (D)
Cotter pins 2ea. (E)
Hardware:
REAR WHEEL ASSEMBLY
B
A
C
D
E
C
A
B
E
1. Slide wheel spacer (A) over
axle
2. Insert Key (B) into Keyway
grove on axle.
3. Install Tires on rear
axle making sure air stem on
rim faces out.
4. Attach wheel to axle
using hardware in the
following order:
Washer (C)
Castle Nut (D)
Cotter Pin (E)
5. Tighten castle nut (D) snug.
Do not over tighten.
6. Install cotter pin (E), make
sure to bend ends over once
installed.
D
Stem
Failing to install cotter pins
could be hazardous.
Failing to install cotter pins
could cause the wheel to fall
off resulting in an accident.
Never operate Go Kart
without cotter pins installed
!
WARNING
Keyway
Grove
Rear wheel