PARTS
FRONT WHEEL ASSEMBLY
B
A
B
C
A
M14 Washer 2ea. (A)
M14 Castle Nut 2ea. (B)
Cotter Pins 2ea. (C)
Hardware:
1. Locate front wheels.
Note: Front wheels have
bearings on both sides of
hubs
2. Install front tires on
axles making sure air
stem on rim faces out.
3. Attach wheel to axle
using hardware in the
following order:
Washer (A)
Castle Nut (B)
Cotter Pin (C)
4. Tighten castle nut (B)
snug. Do not over tighten.
5. Install cotter pin (C),
make sure to bend ends
over once installed.
Failing to install cotter pins
could be hazardous.
Failing to install cotter pins
could cause the wheel to fall
off resulting in an accident.
Never operate Go Kart
without cotter pins installed
!
WARNING
C
Bearing
Front Wheel
Air stem to
face out