Coleman Powersports CC100X, Owner'S Manual, Page: 30 / 40

Storage
If the Mini Bike is left unused for an
extended period of time proper stor-
age maintenance is required.
1. Wash Mini Bike thoroughly, then
wax painted parts with a non abrasive
auto wax. Coat vinyl seat and rubber
parts with a vinyl/rubber protectant.
Note: Keep water away from air
-
ing to avoid water from entering the
engine and/or components.
2. Drain carburetor by placing fuel
valve (1) to the off (horizontal) posi-
tion and opening the drain screw
(2). Allow all fuel to drain from the
carburetor. Once fuel is drained, re-
tighten drain screw (2). Note: Make
sure to drain fuel in a proper storage
container.
3. Fill fuel tank to full with gasoline
mixed with fuel stabilizer as
recommended by the fuel stabilizer
manufacture. Note: Fuel stabilizer
can be purchased at most motorcycle
shops and auto parts stores.
4. Remove spark plug and poor 1
tablespoon of motor oil in the spark
plug hole. Re-install spark plug.
5. Place the starter button to the off
position and pull the start recoil cord
a few times. This is to coat the inside
cylinder head with oil.
6. Fill tires with correct air pressure.
7. If possible, store Mini Bike in a
shed or garage with a cover to protect
from dust, dirt and humidity. If the
Mini Bike must be stored outdoors,
cover completely with a good water-
proof cover.
1
Returning to service
1. Wash Mini Bike thoroughly.
Note: Keep water away from air
washing to avoid water from
entering the engine and/or
components.
2. Drain engine oil and replace
with fresh clean oil as listed in this
manual.
3. Review this owner’s manual
and follow the pre-ride inspection
procedures.
4. Star engine by following the
starting procedures in this manual.
2