Coleman Powersports CC100X, Owner'S Manual, Page: 27 / 40

Chain
Chain and Sprocket
Inspection
Inspect the drive chain for wear,
rust, bound links, proper lubrication
and proper tension.
If the drive chain has a problem
correct or replace. Contact a service
center for chain replacement.
A worn drive chain could also mean
the sprockets may be worn.
Look for the following on the
sprockets (1): Worn teeth, broken or
damaged teeth, Loose sprocket
mounting nuts.
If the sprocket shows signs of wear,
contact a service center for
replacement.
Chain tension
Chain tension (slack)
adjustment
1. Loosen bolt on chain tensioner
(2).
3. If chain needs more tightening
after adjustment, loosen the 4 bolts
on the bottom of the engine plate
and move engine forward .
Note: Make sure chain is in line
with sprockets after adjustment
4. Re-check chain tension.
1
Lubricating the chain before each
ride will help to ensure maximum
life of the chain and sprockets.
Instructions for cleaning
and chain lubrication:
1. Clean chain with a chain cleaner.
2. Lubricate chain with chain lube.
Chain lubrication
MAINTENANCE
1/2 - 3/4 in.
(15-20mm)
1
2
3
Check the slack tension of the chain
,The chain (1) slack tension should
be 1/2 - 3/4 in. (15-20mm)
2. Move Tensioner back to tighten
chain or forward to loosen chain.