matrIQ Optical Switch
|
matrIQ Switch
Coherent Solutions Ltd.
Version
1.03
7
Status LED
The Status LEDs are used to denote the operation state of the matrIQ Switch, and will indicate
which state the switch is in.
The different colors have slightly different meanings for the different matrIQ Switch models.
3.2.1
For matrIQ Switch: 1x1 and 1x4 models
•
Blinking yellow -
Indicates initialization on startup.
•
All off -
Indicates that the matrIQ Switch is in the
PARK
state (
State 0
).
•
Solid green -
Indicates which state the matrIQ Switch is routed to.
•
Solid red -
Indicates a Switch error. Most often this means an invalid route position.
3.2.2
For matrIQ Switch: Crossover models
The matrIQ Switch -XXX4 is a 2x2 crossover switch. This means that it has only 2 valid states:
Transmit (T) and Cross.(C)
•
Solid green -
Indicates which state the matrIQ Switch is in (default is T)
•
Solid red -
Indicates there was an error in switching states. Only 1 LED will light up.
3.2.3
For matrIQ Switch: Duplex models
The matrIQ Switch -XXX5 is a duplex switch. This means that it has only 2 valid states: 1 and
2.
•
Solid green
–
Indicates which state the matrIQ Switch is in (default is 1)
•
Blinking red -
Indicates there was an error in switching states. Only 1 LED will light up.
3.2.4
For matrIQ Switch: 1xN models
•
Blinking yellow -
Indicates initialization on startup.
•
Solid green -
Indicates successful initialization and communication.
•
Solid red -
Indicates a Switch error. Most likely an initialization error at startup.
