matrIQ Optical Switch
|
matrIQ Switch
Coherent Solutions Ltd.
Version
1.03
5
2
Safety Information
Before using the
matrIQ Switch
module, ensure that the following safety information has
been read and understood.
W
ARNING
•
Do not install or terminate fibers while a light source is active.
Care must be taken to ensure that the instrument has been turned
OFF before inspecting the end face(s) of the instrument, or any
optical patch cords connected to this instrument. Never look
directly into a live fiber; ensure that your eyes are protected at all
times.
•
The use of controls, adjustments and procedures other than those
specified herein may result in exposure to hazardous situations or
impair the protection provided by this unit.
C
AUTION
The matrIQ Switch instruments are sensitive to electrostatic discharge
(ESD). Store the instruments in protective electrostatic packaging.
I
MPORTANT
•
For electromagnetic compatibility, this instrument is a Class A
product. It is intended for use in an industrial environment. There
may be potential difficulties in ensuring electromagnetic
compatibility in other environments, due to conducted as well as
radiated disturbances.
•
Wherever the
symbol is printed on the unit, refer to the
instructions provided in the device documentation for related
safety information Ensure that the required conditions are met
and understood before using the product.
