PXIe Platform Bit Error Rate Tester
|
BERTPXIe-1003/1005
Coherent Solutions Ltd.
Version
1.00
46
9.1.2
Syntax format
Argument
Data Format
<wsp>
Specifies the whitespace character (01
16
–
09
16
, 0B
16
–
20
16
).
<value>
Specifies string or numerical data (integer, decimal, or exponential
(10e-9 or 5.8e6))
[Value1|Value2]
Specifies a list of parameters from which you can choose one to use.
The ‘
|
’
symbol separates different parameters.
In the example, either the input parameter [Value1] or [Value2] can be
used, but not both.
This argument can be omitted where the command has a default
value defined in the command description.
9.1.3
Module (slot) and unit (channel) index
Many commands require the index of a specific module or installed unit.
For such indexes, the following convention is used:
•
<c>:
The chassis index in which the module is installed. This is an integer.
•
<n>:
The slot (or source) index of the module. This is an integer, <1 to 18>.
•
<m>:
The channel index of a specific unit in the module. This is an integer, <1, 2 >.
9.1.4
Message queues
Information is exchanged in the form of messages. These messages are held in the input and
output queues.
The output queue stores responses to query commands. The CSLServer transmits any data in
the output queue when a read request is received. Unless explicitly specified otherwise in the
command description, all output response data is transmitted in ASCII format.
