CognitiveTPG A776 ColorPOS, Programming Manual

Page: 41 / 180

Chapter 5: Programming commands 29
A776-PG00001 D 07/13 A776 (B780) Programming Guide
Select receipt or slip for printing; slip for MICR read
ASCII ESC c 0 n
Hexadecimal
1B 63 30 n
Decimal 27 99 48 n
Value of n:
1, 2, 3 Receipt selected
4 Slip selected
8 Validation station selected
Default of n: 1
Selects the station for printing. When slip is selected, the printer waits for the paper to be inserted. When slip has
already been selected and the selection is changed, the form is opened.
If the station has already been selected and it is re-selected, no action takes place.
Slip waiting time is configurable using the configuration menu and the wait time appears on the Diagnostic menu
printout
Exceptions
Receiving the command discards unprinted data in the buffer, forcing a “beginning of line” state.
When n is out of range this command is ignored.
Select receipt or slip for setting line spacing
ASCII ESC c 1 n
Hexadecimal
1B 63 31 n
Decimal 27 99 49 n
Value of n:
1, 2, 3 Select receipt
4 Select Slip
8 Select validation
Default of n: 1
Selects which station receives the effects of the following commands:
1. Select Default Line Spacing (1B 32)
2. Set Line Spacing (1B 33)
3. Add n extra dot rows (16 n )
Exceptions
This command is ignored if n is out of range.
Select paper sensors to output paper end signals
ASCII ESC c 3 n
Hexadecimal
1B 63 33 n
Decimal 27 99 51 n
This command is ignored.