Chapter 4: Programming the Printer
16
A776 (B780) Programming Guide
A776-PG00001 D 07/13
Print zones for slip station
The slip station prints characters (standard and compressed pitch) and graphics in a print zone of 77mm (3.0”) wide on
a slip or form.
• Standard pitch: 42 characters (columns) per line
• Compressed pitch: 51 characters (columns) per line
•
21 rotated characters
•
210 adjacent bits of graphics
•
420 addressable positions
The print line height of 7x7 dot characters is 2.46mm (.097”). With three-dot spacing, the print line height is 3.53mm
(.139”). See the following illustration (not to scale). To print as close to the bottom of the slip as possible without the
slip leaving the feed rollers, use the “Print and feed
n
lines” (1B 64
n
) command, with
n
= 0.
Slip Print
Zone
Summary of Contents for A776 ColorPOS
