Accessories
The following optional components can be purchased separately. For a complete list of options and accessories, contact
your local Cognex sales representative.
Component
Description
Cognex Industrial GigE
Camera
Light-weight digital camera.
Cognex DS900 Series
Displacement Sensor
Integrated 3D profiling sensor.
Cognex DS1000 Series
Displacement Sensor
Integrated 3D profiling sensor.
CAUTION
:
The vision controller only supports connecting DS1000 series sensors with
the following Type number: 821-0116-xR. The Type number is located on the label
affixed to the DS1000 series sensor.
Cognex DS1000 Series
Power and I/O Cable
M12 to DB15 cable that provides access to the DS1000 series sensor's power, encoder and
trigger connections. For more information, refer to
Power and I/O Cable Specifications
.
DIN Rail Mounting
Bracket
Bracket for mounting the vision controller to a 15mm DIN rail.
Note
: The DIN rail mounting bracket accessory is not suitable for a 7.5mm profile DIN
rail.
DIN Rail Power Supply
A DIN rail-mountable power supply that converts AC mains power to 24VDC.
Terminal Block
Accessory Kit
(VC-100-ACC-KIT)
Includes replacement terminal blocks and connectors for the vision controller:
l
INPUTS terminal blocks (2)
l
OUTPUTS terminal blocks (2)
l
ENCODER terminal blocks (2)
l
24VDC power connector (1)
10
Introduction
Summary of Contents for VC5
Page 1: ...Vision Controller Hardware Manual...
Page 49: ...P N INS 597 0062 01 Rev B...
