Cognex MX-1502, User Manual

Page: 13 / 26

Tip : If you want to develop your own application instead of using the DataMan Quick Setup, use the Mobile SDK
available at http://cognex.com .
Note : You can also perform the reader configuration in the proxy mode of the DataMan Quick Setup by using the
DataMan Setup Tool .
Firmware Upgrade with DataMan Quick Setup
To upgrade the firmware on your MX-1502 via the DataMan Quick Setup, follow the steps below:
Tip : Firmware can be upgraded via the DataMan Setup Tool as well.
1. Make sure that your mobile device is connected properly to the MX-1502 and that you have performed Initial
Testing .
2. Navigate to the Device Settings page and tap Firmware update .
3. Tap on the firmware version you want to update to.
4. Tap Download & Update .
13
The DataMan Quick Setup