Initial Setup
Perform the steps below to get your MX-1502 system up and running quickly and scan barcodes.
1.
Assemble your MX-1502.
Tip
: For details, consult the
MX1502 Reference Manual
.
i. Make sure that there is a battery in the MX-1502 device.
ii. Make sure that the mobile device is powered on.
Note
: On some Android devices, the USB device class is not set by default, which hinders
communication with the MX-1502. Please make sure that either MTP or PTP is selected on your
mobile device when connected to a USB host.
iii. Ensure that the MX-1502 engine is turned on by pressing either of the trigger buttons (left or right side).
2. Scan the necessary Reader Programming (RP) codes from the following list:
USB Mode (Android)
USB Mode (iOS)
Enable Android Keyboard Emulation
6
Initial Setup
