Cognex MVS-8000 Series, Hardware Manual

Page: 50 / 86

MVS-8600 Hardware 2
50 MVS-8600 Hardware Manual
Mechanical Specifications
This section describes the mechanical layout, connectors, environmental requirements,
and shipment packaging for the MVS-8600 series frame grabbers.
Component Diagrams
The MVS-8601 and MVS-8602 cards are short length PCI cards, measuring 6.6 x 4.2
inches (168 x 107 mm), and occupying a single PCI bus slot. The MVS-8602e is a short
length PCI Express card measuring 6.6 x 4.2 inches (168 x 107 mm), and occupying a
single PCI Express x4 slot.
Figure 15 shows the connectors on an MVS-8602 circuit board and Figure 16 shows a
similar diagram for the MVS-8602e.
Figure 15. MVS-8602 component location diagram
The MVS-8601 has a single camera port 0 in the same position as camera port 0 in figure
above, and does not have the second camera port 1. In all other ways, the MVS-8601
has the same layout as the MVS-8602.
Camera
168 mm (6.6”)
107 mm (4.2”)
P8
P7
P3
P2
P1
P4
P6
Hirose 12-pin
I/O
Connector
S1
S2
Factory Diagnostics Only
U26
Pin 1 Pin 1
Pin 26
Port 0
Camera
Port 1
(MVS-8602
only)
5V Key 3.3V Key Only used by
66 MHz slot