CC-Link Terminal Block Assignments
Note
: The CC-Link terminals are only available on the CIO-MICRO-CC I/O module.
The CC-Link terminal block connectors conform to the CC-Link specifications. Refer to the CC-Link web site for more
information and specification details. Recommended wiring is 16 - 22 AWG, solid or stranded wire.
CAUTION
:
The maximum torque that can be applied to the terminal block connectors is 0.1921 Nm (1.7 in-lb).
Applying torque above this limit can damage the connectors.
Pin Label
Signal Name
LED
Indicates
DA
Communication Data
RUN
Normal
DB
Communication Data
ERR
Error
DG
Ground
SD
Send
SLD
Shield
RD
Receive
FG
Earth
38
Specifications
