I/O Module Cable (In-Sight Micro Series Vision System)
The I/O Module cable provides access to the In-Sight Micro vision system’s trigger and high-speed outputs This cable is
available in the lengths listed below.
Note
: The In-Sight Micro vision system uses only the , TRIGGER-, HS OUT 0, HS OUT 1 and HS
COMMON signals. It does not use the power that is available from the I/O module's I/O (DB15) connector.
Length
Part #
0.7 m
CCB-M8DSIO-00
2 m
CCB-M8DSIO-02
5 m
CCB-M8DSIO-05
10 m
CCB-M8DSIO-10
15 m
CCB-M8DSIO-15
I/O Module Cable (In-Sight 5000 Series Vision System)
The I/O Module cable provides access to the In-Sight 5000 series vision system’s power, trigger, high-speed outputs and
24V Common signals. This cable is available in the lengths and styles listed below.
Length
Standard Part #
45-Degree Key Right-Angle Part #
35-Degree Key Right-Angle Part #
2 m
CCB-84901-0901-02
CCB-84901-4001-02
CCB-84901-5001-02
5 m
CCB-84901-0902-05
CCB-84901-4002-05
CCB-84901-5002-05
10 m
CCB-84901-0903-10
CCB-84901-4003-10
CCB-84901-5003-10
15 m
CCB-84901-0904-15
CCB-84901-4004-15
CCB-84901-5004-15
10
Introduction
