Specifications
The following sections list general specifications for the vision system.
In-Sight 8200 and 8400 Series Vision System Specifications
Specifications
8200
8200C
8400
8400C
8401
8401C
8402
8402C
Minimum Firmware
Requirement
In-Sight
version
5.2.0
In-Sight
version
5.5.0
In-Sight
version
5.2.0
In-Sight
version
5.5.0
In-Sight
version
5.2.0
In-Sight
version
5.5.0
In-Sight
version
5.2.0
In-Sight
version
5.5.0
Job/Program Memory
512MB non-volatile flash memory; unlimited storage via remote network device.
Image Processing
Memory
512MB SDRAM
Sensor Type
1/1.8 inch CMOS, global shutter
Sensor Properties
3.6mm diagonal, 4.5 x 4.5μm sq. pixels
7.38mm diagonal, 4.5
x 4.5μm sq. pixels
9mm diagonal, 4.5 x
4.5µm sq. pixels
Maximum Resolution
(pixels)
1
640 x 480
1280 x 1024
1600 x 1200
Electronic Shutter
Speed
14µs to 520ms
17.4µs to 750ms
20µs to 940ms
Acquisition
Rapid reset, progressive scan, full-frame integration.
Bit Depth
256 grey
levels (8
bits/pixel)
24-bit
color
256 grey
levels (8
bits/pixel)
24-bit
color
256 grey
levels (8
bits/pixel)
24-bit
color
256 grey
levels (8
bits/pixel)
24-bit
color
Frames Per Second
(FPS)
2
217 FPS
135 FPS 217 FPS
135 FPS 76 FPS
45 FPS
53 FPS
33 full
frames per
second.
Lens Type
C-Mount
Trigger
1 opto-isolated, acquisition trigger input. Remote software commands via Ethernet. (RS-232C
available when using the optional CIO-MICRO I/O module.)
Discrete Inputs
None. (Eight additional general-purpose inputs available when using the optional CIO-MICRO
I/O module.)
Discrete Outputs
2 opto-isolated, NPN/PNP high-speed output lines. (Eight additional general-purpose outputs
available when using the optional CIO-MICRO I/O module.)
Status LEDs
Network, 2 user-configurable.
Network
Communication
1 Ethernet port, 10/100/1000 BaseT with auto MDIX. IEEE 802.3af TCP/IP Protocol. Supports
DHCP, static and link-local IP address configuration.
Serial Communication
None. (RS-232C: 4800 to 115,200 baud rates when connected to the optional CIO-MICRO I/O
module.)
Power
Class 2 Power over Ethernet (PoE) device.
Power Type
PoE Type A and Type B.
Power Consumption
6.49 W maximum per Class 2 PoE.
Current
Per Class 2 PoE requirements.
1
The number of image sensor rows are configurable and can be set within the In-Sight Explorer software. Decreasing the number of rows will
increase the number of frames per second acquired by the vision system. Refer to the AcquireImage topic in the
In-Sight
®
Explorer Help
file for
more information.
2
Maximum frames per second is job-dependent, based on the minimum exposure for a full image frame capture using the dedicated acquisition
trigger, and assumes there is no user interface connection to the vision system.
22
Specifications
