Cognex In-Sight 8200, Reference Manual

Page: 10 / 39

Accessories
The following components can be purchased separately. For a complete list of options and accessories, contact your
local Cognex sales representative.
Cables
Note : Cables are sold separately.
CAUTION : All cable connectors are “keyed” to fit the connectors on the vision system; do not force the connections
or damage may occur.
Breakout Cable
The Breakout cable provides access to the vision system’s trigger and high-speed outputs. The Breakout cable can be
connected to devices, such as a PLC, trigger sensor or strobe light. The Breakout cable is not terminated. The pin-outs
for the cable are listed in the Breakout Cable Specifications on page 30 .
Length Part Number
0.6m CCB-M8IO-00
2m CCB-M8IO-02
5m CCB-M8IO-05
10m CCB-M8IO-10
15m CCB-M8IO-15
I/O Module Cable
The I/O Module cable is used with the CIO-MICRO. The I/O Module cable connects the vision system directly to the I/O
module via the DB15 connector. When connected, the I/O Module cable provides access to the vision system’s trigger
and high-speed outputs. The pin-outs for the cable are listed in the I/O Module Cable Specifications on page 31 . This
cable is available in the lengths listed below.
Length Part #
0.7 m CCB-M8DSIO-00
2 m CCB-M8DSIO-02
5 m CCB-M8DSIO-05
10 m CCB-M8DSIO-10
15 m CCB-M8DSIO-15
10
Introduction