Cognex In-Sight 7600, Reference Manual

Page: 22 / 113

Cables
Note : When using the 15 meter Breakout cable, full 24VDC voltage must be maintained at the input leads of the
Breakout cable when the vision system is operating.
Accessory Part Number Accessory Image
Breakout Cable, M12-12 to Flying Lead CCB-PWRIO- xx (straight, xx specifies length:
5m, 10m, 15m)
Breakout Cable, M12-12 to Flying Lead CCB-PWRIO-xxR (right-angled, xx specifies
length: 5m, 10m, 15m)
Ethernet Cable, X-coded M12-8 to RJ-45 CCB-84901-2001-xx (straight, xx specifies
length: 2m, 5m, 10m, 15m, 30m)
Ethernet Cable, X-coded M12-8 to RJ-45 CCB-84901-2002 (right-angled, xx specifies
length: 2m, 5m, 10m)
Ethernet Cable, Robotic X-Coded M12-8 to RJ-
45 CCB-84901-2RBT-xx (straight, xx specifies
length: 2m, 5m, 10m)
External Light Cable, Grey
Note : This cable does not support intensity
control.
CCB-M12LTF-xx (xx specifies length: 0.5m,
1m, 2m, 5m)
External Light Cable, Yellow
Note : This cable supports intensity control.
IVSL-5PM12-J300
IVSL-5PM12-J500
IVSL-5PM12-J1000
IVSL-5PM12-J2000
External Light Cable, Black
Note :
l
This cable supports intensity control.
l
This cable is used with standard
SVL lights.
IVSL-M12-NSB-300
IVSL-M12-NSB-1000
IVSL-M12-NSB-2000
I/O Module Cable M12-12 to DB15 CCB-PWRIO-MOD-xx (xx specifies length: 2m,
5m)
22
Introduction