Installation
Read this section to learn how the vision system connects to its standard components and accessories. For a list of
options and accessories, contact your Cognex sales representative.
Note
:
l
Cables are sold separately.
l
If a standard component is missing or damaged, immediately contact your Cognex Authorized Service
Provider (ASP) or Cognex Technical Support.
CAUTION
:
All cable connectors are keyed to fit the connectors on the vision system. Do not force the connections
or damage may occur.
Connectors and Indicators
Connector
Function
ENET Connector
Connects the vision system to a network. The ENET connector provides the Ethernet
connection to external network devices. For more information, refer to the
LIGHT Connector
Connects the vision system to an external lighting device. For more information, refer to the
.
PWR Connector
Connects the Breakout cable, which provides connections to an external power supply, the
acquisition trigger input, general-purpose inputs, high-speed outputs, and RS-232 serial
communications. For more information, refer to the
13
Installation
