Cognex In-Sight 3400, Manual

Page: 87 / 90

Appendix D
D.1 Installing the Remote Head Camera Mount
The remote head camera mount kit includes the hardware required to secure the remote head
camera to a mounting surface. The Lens Tube (item 6) is included with the kit, but is not required
for all applications. The Lens Tube is highly recommended for environments where vibration may
be present.
Figure D-1: Remote Head Camera Installation Diagram
1. Attach the remote head camera bracket (item 4) to the mounting surface (reference Figure
4-8).
2. Attach the remote head camera (item 5) to the remote head camera bracket using three
M3 x 8mm Phillips head screws (item 3).
3. If required, slide the Lens Tube (item 6) over the remote head camera (item 5) and secure to
the remote head camera bracket (item 4), using four M4 x 18mm cap screws (item 1) and
lock washers (item 2).
4. Connect the Camera cable to the remote head camera.
75