Cognex In-Sight 3400, Manual

Page: 50 / 90

Specifications
4.1.1 In-Sight 3400 Sensor Specifications
Table 4-1: In-Sight 3400 Sensor, General Specifications
SPECIFICATION DESCRIPTION
Firmware In-Sight version 3.1.0 and later.
Job/
Program
1
32MB non-volatile flash memory. Unlimited
storage via remote network device. Memory
Image/
Processing 64MB SDRAM. Only 48MB available for
Imaging/Processing.
I/O Trigger 1 opto-isolated, acquisition trigger input.
Remote software commands via Ethernet and
RS-232.
Inputs Eight discrete inputs, using optional I/O
Expansion Module.
2 built-in, high-speed outputs. Outputs
Eight additional discrete outputs, using optional
I/O Expansion Module.
Status LEDs 7 total: power, network, camera, high-speed
outputs (2) and user-defined (2).
Network 1 Ethernet port, 10/100 Base-T, TCP/IP protocol.
100 Base T is recommended. Supports DHCP
(factory default) or static IP address. Communications
Serial RS-232C port (4800 to 115,200 baud rates).
Power 24VDC ±10%, isolated, 500mA.
Material Painted, cast aluminum housing.
Mounting Four 6.86mm (.27”) thru-holes.
Dimensions Width: 293.1mm (11.54”), Depth: 142.5mm
(5.61”), Height: 45.5mm (1.79”).
Mechanical
Weight 1094g (2 lb., 7 oz.).
Temperature 0° to 60°C (Operating), -40° to 85°C (Storage).
Humidity 95%, non-condensing (Operating and Storage).
Protection IP52.
Shock 30G Shock per IEC 68-2-27.
Environmental
Vibration 2G from 10-2000Hz Vibration per IEC 68-2-6.
Certifications CE, FCC, UL, CUL.
1. In-Sight 3400 sensors with P/N 800-5809-1 Rev. F and higher have 32MB of non-volatile
flash memory. All prior In-Sight 3400 sensors have 16MB of non-volatile flash memory. To
locate the Part Number, refer to the Part Number label on the front panel of your sensor.
In-Sight 3400 sensors with 16MB of non-volatile flash memory are compatible with
In-Sight firmware version 2.51 and higher.
38