Specifications
The following sections list general specifications for the vision system.
In-Sight 2800 Series Vision System
Specification
2800
Weight
6.2 mm: 141 g
16 mm: 169 g
Right angle configuration adds 50 g
Power
24 VDC +/- 10%, USB 5V 500mA
24 V Supply
24VDC ± 10%
LPS or NEC class 2
Power consumption without USB device attached:
l
Average ≤ 5 W using High-Powered Light
l
Average ≤ 6 W using High Frequency High-Powered Light
l
Peak ≤ 1.6 A using internal illumination
Operating
Temperature
0–40 °C (32–104 °F)
Storage
Temperature
-10–60 °C (14–140 °F)
Humidity
<95% non-condensing
Environmental
IP67
Note
: IP67 rating applies only if all blind plugs and cables are attached properly, or the
provided connector plug is installed. Also make sure that the IP67-rated cover is installed
properly.
Shock (Shipping
and Storage)
IEC 60068-2-27: 1000 shocks, semi-sinusoidal, 11g, 10ms
ISTA-1A Standardized Testing - Packaged Products 150lb or less
Vibration
(Shipping and
Storage)
IEC 60068-2-6: vibration test in each of the three main axis for 2 hours @ 10 Gs (10 to 500 Hz at
100m/s2 / 15mm)
FedEx Vibration Testing for packaged products 150 lbs or less
RS-232
RxD, TxD according to TIA/EIA-232-F
High-Speed
Outputs
0, 1, 2, 3
I
MAX
: 50 mA
V
OL
: ≤ ± 3 V @ 50 mA
Inputs
0 (Trigger), 1, 2,
3
V
IL
: ≤ ± 6 V
V
IH
: ≥ ± 12 V
I
TYP
: 4.2 mA @ 24 V
Ethernet
10/100/1000. Full duplex or half duplex.
Job Storage
7.8 GB
In-Sight 2800 Series Vision System Image Sensor
Specification
Model
Image Sensor
1/3-inch CMOS, global shutter
39
Specifications
