Wireless Reader: Changing Batteries
To change batteries, perform the following steps:
1. Twist the reader’s end cap, and take it off.
2. Hold the reader in an upright position and the battery will slide out of the handle.
Note
: You may need to shake the reader slightly.
CAUTION
:
The battery used in these devices may present a risk of fire or chemical burn if mistreated. Do
not disassemble, heat above 60ºC (140ºF), or incinerate. Replace battery with Cognex DMA-HHBATTERY-
01 only. The use of another battery may present a risk of fire or explosion.
3. Put the replacement battery into the slot. The battery has a small triangle on one side. Make sure that you insert
the battery in a way that the triangle end goes into the slot first.
28
Connection Options
