6
DEC 2021
INSTALL GUIDE
1
INSTALLATION
COGNEX DataMan 374
REV 00
1.2
INSTALLATION FOR COLLATE & OMR FOLDER READING INTERFACE
Mount the reader as required following the procedures detailed in section
.
When installing, begin from the Reader back to the board to
ensure any excess cable can be tied back into the reader section.
Figure 1.9 shows the Reader mounting bracket located in its fixed position for top-read
and bottom-read.
QTL-RND-OPS-00000309-A-00
Figure 1.9 –
Reader mounting bracket located in fixed position
1.2.1
CABLE ROUTING
Route the reader cables accordingly using cable ties where necessary following
Figure 1.10, and Figure 1.11.
QTL-RND-OPS-00000310-A-00
Figure 1.10 – Reader cable routing
