Note the name of the
RCA
input on your TV that is connected to the digital receiver (ex.: VIDEO-1).
In the space below, record the
serial number
and
U/A number
of your new digital receiver. You may require
these numbers in the event where troubleshooting with technical support is needed. They are found
underneath
or on the back of the receiver
.
A. Connect one of the supplied coaxial cables from your wall to the
CABLE/RF-IN
input of your digital receiver.
B. Connect the new power supply from the digital receiver to an active wall power outlet.
C. Connect the other supplied coaxial cable from the
TO TV/VCR (RF-OUT)
output of the digital receiver to the
CABLE/RF-IN
input of your TV. Alternatively, you may connect the RCA output of the digital receiver to the RCA input on
your TV using your own RCA cable (not supplied by Cogeco).
Setting up Cogeco
Standard Definition Receiver
Before connecting your SD receiver
Connecting your digital receiver
1
2
3
Serial no.
U/A no.
A. Press the INPUT or SOURCE button on your TV’s remote control and select the video input that connects your TV
to your digital receiver (ex.: VIDEO-1, TV/CABLE or ANTENNA).
B. After selecting the correct video and ensuring your TV input is set to channel 3 (if applicable), the receiver will
automatically start the initialization process. This process could take up to 30 minutes.
C. Your receiver will shutdown automatically following completion.
D. Turn on your receiver by pressing the CBL button followed by the PWR button on your Cogeco remote control.
E. Select channel 3 using your Cogeco remote control.
F. Your receiver is activated if channel 3 displays programming on your TV screen.
G. The programming guide and menus will be available within 1 hour following activation.
H. Cogeco On Demand will be available as soon as you can access the programming guide and menus.
I. If channel 3 is not displaying programming, disconnect the power cord and then reconnect the cord.
If programming is still not being displayed, please contact technical support at
1-877-301-1210.
D. Note the name of the coaxial or RCA input on your TV that is connected to the digital receiver (ex.: VIDEO-1, TV/CABLE or
ANTENNA). Input names may vary by TV. If required, check your TV manual for more information.
Activating your digital receiver
B
A
D
C -
Coaxial
connection
(option 1)
C -
RCA
connection
(option 2)
