English
If the operating voltage and frequency as preset by coemar does not correspond to that of the country in which you are ope-
rating, you may alter the preset by following the instructions in the paragraphs which follow.
An error in voltage or frequency selection may seriously compromise the correct functioning of the
projector.
16.1 Selecting the voltage on the autotransformer
1) Using a Philips head screwdriver, remove the 6 screws (
A
) on the lateral cover of the fixture’s base as shown in the dia-
gram below, thereby removing the cover and obtaining access to the internal features of the
ProSpot LX
base.
2) Locate the autotransformer (B) on the right of the base.
16. Altering the operating voltage and frequency
(Reserved for technical staff only)
