7. Functions
manual system 6
.is a controller which offers complete control over 6 channels of DMX 512 or 0/+10V DC.
Check that the DMX out led is on and flashing on the
manual system 6
indicating that the controller is powered up and genera-
ting DMX signal.
If the DMX out led is not flashing, re-power the unit as described in section 6 of this manual.
7.1. Adjusting output levels
With this function it is possible to regulate the level of dmx or analogue signal being outputed.
7.2. Adjusting fade times
This function allows the output of the master slider to be assigned a fade time:
Adjsut the level of the
delay time
potentiometer to, say, 16 seconds
delay time
(sec.)
0
16
0,5
2
3,5
5,5
7
8,5
9,5
11,5
13,5
15
1-
Adjust the level of the master slider from 0 al 100%.
The leds corresponding to the sliders (1 to 6) will come on at a level
of brightness corresponding to the respective levels being outputed.
At this time the
manual system 6
is generating a 0/+10 V DC or
DMX 512.signal.
0/+10V-DMX 512
master
manual system
6
0
10
20
30
40
50
60
70
80
90
100
dmx out
2-
Adjust the position of sliders 1 to 6 to achieve the output level which
you require
The leds corresponding to the sliders (1 to 6) will remain off, indica-
ting that there is no signal being transmitted.
4
3
2
1
6
5
0
10
20
30
40
50
60
70
80
90
100
10
1-