CoeLux
®
45 HC
User's manual
Edition E1
Page 6 of 13
2.2
GENERAL SAFETY WARNINGS
WARNING!
Read the entire manual, as it contains important information to install and operate the unit
correctly.
To avoid accidents or injuries, follow the procedures described in this manual to install and use the
unit. If you do not follow the instructions and warnings given in this manual, the guarantee will no
longer be valid.
Furthermore, CoeLux S.r.l. will not accept any liability for any damages to objects, people and
animals, which may arise from the failure to comply with the instructions and warnings given in
this manual. CoeLux S.r.l. will not be held liable for the incorrect installation and/or assembly or
which does not comply with what is described in the installation manual.
WARNING!
All assembly, installation and testing operations must be carried out only by CoeLux qualified
personnel. The operations to fasten the product to the existing structure must be carried out by
qualified personnel (CoeLux does not deal with this qualification).
N.B.:
Some details regarding how to switch on the product or how to operate it in general may depend
on the choices made during assembly and/or installation.
•
The product is not a toy and must be kept out of children’s reach! Install the product where
children are unable to reach it.
•
Take care not to leave the packaging material unguarded, as it could be dangerous for children
to play with it.
•
The product can be installed and used only in closed, dry, internal rooms, which are not
exposed to condensation and wet.
CAUTION:
•
Do not install the equipment in dirty (dusty) rooms, where gas, steam or dust is, or may be
present! Risk of explosion!
•
Do not cover the system with thermal insulation materials:
More specifically,
in order to maintain the UL certification, the distance between each surface of the product
and any insulating material present in the ceiling must exceed 76 mm (3 in).
•
The product must not be subjected to extreme temperatures, strong vibrations or mechanical
stress.
•
If you think it is unsafe to operate the product, you must switch it off at the mains and prevent
any incorrect actions. Ask expert personnel to supervise. You should consider it is impossible
to operate when:
-
the product is visibly damaged;
-
the product does not work or does not work correctly (flickering light, release of smoke
or bad smell, audible crackle, discolouring of the product or the surrounding surfaces);