CoeLux
®
45 HC
User's manual
Edition E1
Page 10 of 13
4
MAINTENANCE
CAUTION !
•
Before beginning any routine or extraordinary work on the unit, cut off the unit from the
electric power mains.
•
To access the highest parts of the unit, use appropriate means to perform the work.
Do not climb on unit's parts since delicate and not designed to support people.
•
Never leave tools, equipment or other improper materials on or inside the unit.
The manufacturer is not liable for inobservance of the listed recommendations. Warranty is void
and null if are not carried out ordinary and extraordinary maintenance operations in compliance
with prescriptions reported in the present guide. Moreover, the warranty is void and null for using
of non-original spare parts or maintenance operations performed by unauthorized person of
CoeLux s.r.l.
4.1
GENERAL INSTRUCTIONS
CoeLux® 45 HC is designed for continuous use for a long period of time and requires minimal
supervision. In adequate operating conditions that follow environmental prescriptions of
table 1
,
maintenance needs are minimal; ordinary maintenance by qualified personnel especially depend
on the environmental conditions in the room where CoeLux® 45 HC is installed.
Always contact CoeLux S.r.l. or an authorized installer for service and repairs.
4.2
ORDINARY AND SCHEDULED MAINTENANCE
4.2.1
CLEANING
To minimize the need for cleaning, keep the room as clean as possible following standard
procedures.
Vacuum dust in both the compartment where the product is housed (if accessible) and in the
space where the light is projected. Routine cleaning is essential to maintain product performance.
Limit temperature changes and rising humidity. Humidity condensation events, even after
installation, null and void the warranty and facilitate the formation of dirt that cannot always be
removed.
4.2.2
OTHER WORK
Clean every month the CoeLux® panel (if necessary) and replace Silica-gel every 12 months (asking
to CoeLux S.r.l for a new kit).
If operating or specific installation conditions are especially severe, we recommend more
frequent controls. If large amounts of dirt or dust are found, continuously or even within limited
periods of time, perform more frequent controls and ask to CoeLux for a supervision. In the event
of high humidity or temperature changes, check product performance. In the event of visible
water leaks, immediately cut off power, dry all accessible wet components and call for service by
qualified personnel of CoeLux s.r.l.