ON
3
4
2
Controls and Connection
Version 2.0 November 2018
BLUETOOTH
AD
APTER USER’S GUIDE
For P
ortable Radios with SIMPLE PIN accessor
y connectors
The BlueLink
Ada
pter allo
ws you to use a compa
tible wireless
headset or other audio accessor
y with your two-way radio.
STEP ONE: Charging the BlueLink Adapter
The BlueLink Adapter has an internal Lithium Ion rechargeable battery pack which must be charged prior to operation, and must be
recharged regularly. A fully charged battery will provide approximately 10 hours (or more) of operation before needing to be recharged,
however, operating time can vary depending on usage and the condition of the battery pack. Recharge the battery regularly.
To charge the BlueLink Adapter:
1. Ensure the BlueLink Adapter is turned off, using the switch located on the back of the device.
2. Plug the supplied wall charger into a standard 120 volt AC outlet.
3. Plug the charger into the charge jack on the bottom of the BlueLink Adapter. You will need to remove the protective rubber cover that is
inserted into the charge jack. (To prevent dust and moisture from damaging your adapter, always ensure this cover is in place when you
are not charging the adapter.)
4. Once the charging process has begun, the LED indicator on the top of the BlueLink Adapter will show a constant blue light. Typical
charge time is approximately 5-6 hours. Actual charge time will vary depending on several factors including the battery’s charge state,
condition, and age.
6. Disconnect the charger from the adapter when charging is completed.
Charging Cautions:
- Use only the wall charger supplied by the manufacturer. Do not use any other charger.
- Do not use a wall charger that appears to be damaged. (Example: frayed wires, melted plastic, etc.)
Contact Easy-to-Get Wireless to get a new manufacturer-approved replacement charger.
- Do not tamper with or modify the BlueLink Adapter or charger.
-Always turn the power switch to the off position when charging the BlueLink Adapter.
Connecting the Adapter to Radio
Charging the BlueLink Adapter
STEP TWO: Connecting to a Two-Way Radio
To connect your BlueLink Adapter to a two-way radio, follow these steps:
* Always turn off your two-way radio before connecting the BlueLink Adapter.
* Plug the BlueLink adapter’s radio connector into the speaker-microphone / audio accessory jack of your two-way radio.
* You can attach the BlueLink Adapter to your two-way radio or clothing using the Velcro fastener.
USING THE FRICTION PAD
The BlueLink Adapter is supplied with a rubber Friction Pad. This pad provides additional protection and stability when using the Velcro
Fastener to attach the adapter to a radio or other location.
To install the rubber Friction Pad do the following:
1. Open the Velcro Fastener on the back of the BlueLink Adapter so that the two straps are separated.
2. Align the Friction Pad so that it is centered over the Velcro Fastener on the back of the adapter.
3. Slide one strap of the Velcro Fastener into one of the slots in the Friction Pad and pull the strap through.
4. Slide the other Velcro Fastener strap through the other slot in the Friction Pad.
5. Place the BlueLink Adapter in the position you wish to mount it and close the Velcro Fastener.
Multifunction Talk Switch
Used to place the BlueLink
Adapter in pairing mode.
Once paired with an audio
accessory, this switch is used
to activate the Push-To-Talk
function of the two-way radio
Status LED
The LED flashes messages that
let the user know the current
status of the BlueLink Adapter
Velcro Fastener
Used to attach
the BlueLink
adapter to the
two-way radio
or to the user’s
belt or lapel
Radio Connector
Plugs into the two-way
radio’s Mic/Speaker jack.
Power Switch
Turns the BlueLink
Adapter on and off
Charge Jack
Use to connect the supplied
charger in order to recharge
the BlueLink Adapter’s
internal battery pack
ON
Bluetooth Adapters
Made in T
aiwan
FCC ID: N2E-BTM01
Feder
al C
ommunic
ation C
ommission In
ter
fer
enc
e S
ta
temen
t
This equipmen
t has been t
est
ed and f
ound t
o c
omply with the limits f
or a Class B
dig
ital devic
e, pursuan
t t
o P
ar
t 15 of the FC
C Rules
. T
hese limits ar
e desig
ned t
o
pr
ovide r
easonable pr
ot
ec
tion against har
mful in
ter
fer
enc
e in a r
esiden
tial
installa
tion.
This equipmen
t gener
at
es uses and can r
adia
te r
adio fr
equenc
y
ener
gy and
, if not installed and used in ac
cor
danc
e with the instruc
tions
, ma
y
cause har
mful in
ter
fer
enc
e t
o r
adio c
ommunica
tions
. Ho
w
ev
er
, ther
e is no
guar
an
tee tha
t in
ter
fer
enc
e will not oc
cur in a par
ticular installa
tion. I
f this
equipmen
t does cause har
mful in
ter
fer
enc
e t
o r
adio or t
elevision r
ec
eption, which
can be det
er
mined b
y tur
ning the equipmen
t off and on, the user is enc
our
aged t
o
tr
y t
o c
or
rec
t the in
ter
fer
enc
e b
y one of the f
ollo
wing measur
es:
-R
eor
ien
t or r
eloca
te the r
ec
eiving an
tenna.
-Incr
ease the separ
ation bet
w
een the equipmen
t and r
ec
eiv
er
.
-C
onnec
t the equipmen
t in
to an outlet on a cir
cuit diff
er
en
t fr
om tha
t t
o which the
rec
eiv
er is c
onnec
ted
.
-C
onsult the dealer or an exper
ienc
ed r
adio/T
V t
echnician f
or help
.
FC
C C
aution: An
y changes or modifica
tions not expr
essly appr
ov
ed b
y the par
ty
responsible f
or c
omplianc
e c
ould v
oid the user's author
ity t
o oper
at
e this
equipmen
t.
This devic
e c
omplies with P
ar
t 15 of the FC
C Rules
. Oper
ation is subjec
t t
o the
follo
wing t
w
o c
onditions: (1)
This devic
e ma
y not cause har
mful in
ter
fer
enc
e, and
(2) this devic
e must ac
cept an
y in
ter
fer
enc
e r
ec
eiv
ed
, including in
ter
fer
enc
e tha
t
ma
y cause undesir
ed oper
ation.
This equipmen
t c
omplies with FC
C RF r
adia
tion exposur
e limits set f
or
th f
or an
unc
on
tr
olled en
vir
onmen
t.
To main
tain c
omplianc
e with FC
C RF exposur
e
complianc
e r
equir
emen
ts
, please a
void dir
ec
t c
on
tac
t t
o the tr
ansmitting an
tenna
dur
ing tr
ansmitting
.
RF
Exposur
e W
arning!
Please keep pr
oduc
t 20cm a
w
ay fr
om y
our
body or b
ystander dur
ing the r
adio oper
ation.
The t
ypical handheld t
w
o-
w
ay r
adios w
er
e
cer
tified under mobile usage c
ondition
(i.e
. keep 20cm a
w
ay fr
om the user body)
and use of such r
adio closer than 20cm ma
y
ex
ceed the US RF exposur
e limit
and shall be a
voided
.
codeRED Headsets
www
.coderedheadsets.com
This manual a
pplies to all
BlueLink Bluetooth Ada
pters for radios with
SINGLE or DUAL PIN accessor
y connectors.
