Page 2 of 12
The WingMan Flex can be ordered with a Universal Bracket Kit. The Universal kit includes (2) 90 Degree Universal Mounting Brackets (See
Individual Mounting Bracket Descriptions on page 2). These brackets can be bolted to the Outer Panel of the WingMan Flex and modified as
needed to mount the unit. The WingMan Flex must be hard mounted to the sheet metal of the vehicle to prevent injury to passengers in the
event of a collision. It is the installers responsibility to ensure the product is mounted securely. Make sure proper support is provided between
the vehicle’s sheet metal and the fiber/fabric of the package tray area as in many cases there is a substantial air gap between them. In some
cases you will need to self fabricate brackets to adapt the WingMan Flex to your vehicle.
Caution!!! When installing the unit do not push it too hard against the rear window. The unit only needs to just touch the glass
enough to fold the gasket flange back & block out as much flash back light as possible. A broken rear window can result if the unit
is installed too tight against the glass!
For information on how to mount the WingMan Flex™ using vehicle specific kits, please refer to the installation instructions provided with
those kits.
Installation and Mounting Instructions:
CAUTION!
When drilling into any vehicle surface, make sure that the area is free from any electrical wires, fuel lines, vehicle upholstery, etc. that
could be damaged.
Bracket Identification:
LONG VERSION
SHORT VERSION
MINI VERSION
MOUNTING BRACKET
ALL VERSIONS
Summary of Contents for WingMan Flex Series
Page 10: ...Page 10 of 12 Notes...
Page 11: ...Page 11 of 12 Notes...
