background image

4

Using Your Remote Control, continued

 

Turning on the Vehicle’s Headlights (Optional)

If this feature is enabled on your system, pressing and holding the LOCK button on the remote control for 3 seconds
will turn on the vehicle’s headlights for 30 seconds.

 

Activating Optional AUX 1 (Optional)

If this feature is enabled on your system, pressing and holding the LOCK button and the Trunk button on the remote
control simultaneously for 2 seconds will activate an optional feature. This feature can be programmed for a wide
range of functions like power window or sunroof automation, please consult your installing dealer to determine
functionality of your system.

 

Activating Optional AUX 2 (Optional)

If this feature is enabled on your system, pressing and holding the OPT button on the remote control for 2 seconds
will activate an optional feature. This feature can be programmed for a wide range of functions like power window or
sunroof automation, please consult your installing dealer to determine functionality of your system.

 

Activating Optional AUX 3 (Optional)

If this feature is enabled on your system, pressing and holding the LOCK button and the OPT button on the remote
control simultaneously for 2 seconds will activate an optional feature. This feature can be programmed for a wide
range of functions like power window or sunroof automation, please consult your installing dealer to determine
functionality of your system.

 

Activating Optional AUX 4 (Optional)

If this feature is enabled on your system, pressing and holding the UNLOCK button and the OPT button on the
remote control simultaneously for 2 seconds will activate an optional feature. This feature can be programmed for a
wide range of functions like power window or sunroof automation, please consult your installing dealer to determine
functionality of your system.

 

Using the Progressive Car Finder Feature

Press the LOCK button and the UNLOCK button on the remote control to locate your vehicle.  The system will sound
5 times at low volume increasing in volume each of 3 times the button is pressed.

 

Using the Personal Protection Alarm (Panic) 2-Way Remote

Press and hold the LOCK button and the UNLOCK button on the remote control for 2 seconds to activate the
personal protection alarm.  The system will sound for 30 seconds.  Pressing any button on the remote control will
turn the personal protection alarm off.

 

Using the Personal Protection Alarm (Panic) 1-Way Remote

Press and hold the PANIC button on the remote control for 2 seconds to activate the personal protection alarm.  The
system will sound for 30 seconds.  Pressing any button on the remote control will turn the personal protection alarm

off.

Summary of Contents for CA 671















Reviews: