Quick Reference Card
Fixed channel operation
To operate on a fixed channel:
☐
Go to the channel screen, stop scanning, then select a
channel.
☐
Press
PTT
to tune the antenna, if required.
Discreet mode switch
Rx/Tx level
indicator
Rx/Tx indicator
channel name
status areas
left
software key
right
software key
volume/speaker mode indicator
menu bar
mode indicator
Tx/Rx frequency
battery level
indicator
missed call icon
mute type indicator
(highlighted when mute is on)
call type
indicator
Tx power
setting
Pull, then rotate right to
zeroise transceiver
Discreet mode on
(No audio or backlight)
Discreet mode off
Keys
Volume down/up
(when
is present)
Select channel
Scroll left/up/down/right
Menu/action
Selection
Press
Start call
Hold
(for 2 sec) Go to Stations list
End call, start/stop scan
Mute on/off
Manual tune screen
Next speaker mode
Next Digital Voice Rate
Free tune receive
Set transmit power level
Select mute type
Toggle between Analogue and
Secure/DV
Go to GPS screen
Toggle Channel/Station screens
Go to Adjust Display Brightness
screen
FUNC 2
Function Select:
Self Tests Screen/Macros Screen
Stations
Call history
Single call
available for
station
Multiple calls
available for
station
Basics
Calling
Call Types
Selective
Get Status
Message
Channel Test
Send Position
Phone
Get Position
Alert
ALE Sounding
SMS
Voice Message
TOD Request
TOD Broadcast
Making a Station Call
To make a call using one of your pre-defined stations:
☐
Go to the channel screen, then
hold
CALL
or press Key
0
.
Stations
Call history
Single call
available for
station
Multiple calls
available for
station
☐
Scroll to the station that you want to call.
☐
If there are multiple calls available for the station,
press
or
CALL
, then scroll to the desired call type.
☐
Press
CALL
.
☐
Respond to any prompts, then press
CALL
.
© Codan Limited 2019
06-03050-EN Issue 1
