manualshive.com logo in svg

Codan NGT AR, Getting Started Manual

Share
Download
Codan NGT AR Getting Started Manual Download Page 60

Installation

50

NGT Transceiver Getting Started Guide

Connecting a mobile NGT station

Connecting a mobile NGT 

AR

 or 

SR

 station

To connect a mobile NGT 

AR

 or 

SR

 station:

1

Connect the plug of the handset cable to the 

socket on 

the junction box, then secure the locking ring tightly into 
position.

1

Connect the plug at the end of the speaker cable to the 

socket on the junction box.

1

Connect the socket at the end of the 

cable to the plug 

at the end of the 

cable lead from the RF unit, then 

secure the locking ring tightly into position.

1

Connect the socket at the opposite end of the 

cable to 

the 

plug on the junction box, then secure the locking 

ring tightly into position.

1

Connect the plug at the end of the  cable to the socket at 
the end of the  cable lead from the RF unit, then secure 
the locking ring tightly into position.

1

Connect the plug at the opposite end of the  cable to the 
socket located at the base of the antenna, then secure the 
locking ring tightly into position.

Summary of Contents for NGT AR
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands