Installation
48
NGT Transceiver Getting Started Guide
Mounting a mobile NGT station
Most components of a mobile NGT
AR
,
SR
,
AR Voice
, and
VR
station are provided with their own mounting cradles. For
general guidance on suitable locations for equipment and
installing these stations see the reference material on the
enclosed CD.
Mounting the handset cradle
To mount the handset cradle:
1
Mount the handset according to the fitting instructions
(Codan part number 15-00129-001) provided with the
handset cradle.
Mounting the speaker
To mount the speaker:
1
Secure the mounting cradle to the surface with at least
two screws.
Ensure there is sufficient space at the rear for the cable.
1
Attach the speaker to the cradle with the two screws and
rubber washers.
Mounting the junction box (NGT
AR
and
SR
Transceivers only)
To mount the junction box:
1
Use cable ties or screws to secure the junction box in a
suitable location.
