Codan NGT AR Getting Started Manual Download

Page: 27 / 119

Getting started

NGT Transceiver Getting Started Guide

Scanning channels

Before you can switch scanning on, you need to allocate some
channels to be scanned. If Quick Start is available, you can
create a scan list from channels programmed into the
transceiver (see

page 65,

Using Quick Start

). If this feature is

not available, your system administrator must allocate some
channels to a network, then enable scanning of this network.

Switching scanning on or off

To switch scanning on or off:

Press

SCAN

Scanning is toggled on or off.

When scanning is switched on, mute is also switched on.

If you press PTT while the transceiver is scanning, the scan is
paused.

NOTE

SCAN

is also used to end a call then

resume scanning.

Summary of Contents for NGT AR
























































































































Search results

Summary of Contents for NGT AR

Reviews:

Related manuals for NGT AR

Brands by name

Popular brands

Codan NGT AR, Getting Started Manual

Search results

Summary of Contents for NGT AR

Reviews:

Related manuals for NGT AR

Brands by name

Popular brands