I
NSTALLING
THE
TRANSCEIVER
O
VERVIEW
OF
FIXED
STATIONS
88
Envoy™ Transceiver Getting Started Guide
Cables in a fixed station
Mounting a fixed Envoy™ station
A fixed Envoy™ station may be mounted using a 2230 Desk
Console. For general guidance on suitable locations for equipment
and installing the fixed station see the reference material on the
enclosed CD.
RF unit and transceiver supply
The RF unit and the transceiver supply are self-contained and are
usually stacked loosely. If you want to mount the RF unit and/or the
transceiver supply, contact your Codan representative to obtain a
rack-mounting unit or the appropriate mounting cradles.
CAUTION:
If you are mounting an RF unit in a cradle, do not
fit rubber feet to the bottom of the RF unit.
NOTE:
If you are transferring a mobile station to a fixed
station, and you are not mounting the RF unit in
a cradle, rubber feet can be fitted to the bottom of
the RF unit. The rubber feet are available from
Codan (Codan part number 30-11208-000).
Table 5:
Cables for a typical fixed Envoy™ station
Cable
Symbol
Part number
Handset and speaker connector
1
08-06022-001
Cable between RF unit and optional 2230
Desk Console
08-07205-xxx
Coaxial cable between RF unit and antenna
2
08-01503-006
1. The part number for the cable corresponds to a standard 6 m cable.
2. The part number for the cable corresponds to a 30 m coaxial cable. The cable is also available in a
number of shorter lengths.
