C
ONTACTS
A
DDING
A
CONTACT
70
E
NVOY
™ T
RANSCEIVER
G
ETTING
S
TARTED
G
UIDE
Adding a contact
Contacts are used to pre-define the typical calls that you want to
make to another person. For each contact you can define a number
of calls. Each call contains information about:
•
the call system that you want to use
•
the type of call that you want to make to the contact
•
the address or telephone number of the station at which this
contact may be located
To add a contact:
1
From the main menu, select
(
User Data
), then
(
Contacts
).
1
Select
(
Contacts
) or
(
Emergency Contacts
), as
required.
1
Press
(
Add
).
1
Enter the name that you want to use for the contact, then
press
(
Add Call
).
The
HF Network
entry is highlighted.
1
Press or to scroll through the available HF networks
until the one you want to use is shown.
1
Press
to move to the
Call Type
entry.
1
Press or to scroll through the available call types until
the one you want to use is shown.
NOTE:
The call type that you select affects
information that you can enter for the
remainder of this call.
