O
PERATING
THE
TRANSCEIVER
U
PGRADING
THE
TRANSCEIVER
VIA
A
USB
STICK
E
NVOY
™ T
RANSCEIVER
G
ETTING
S
TARTED
G
UIDE
67
Upgrading the transceiver via a USB
stick
Firmware packages, profiles from TPS, and secure keys may be
loaded onto a USB stick, providing a portable method of upgrading
transceivers in the field. You can also read a profile from a
transceiver in the field. When the USB stick is connected to the
control point, a selection menu is shown for various activities,
depending on the values set in
Settings
>
General
>
USB User
Access
.
To manage profiles, firmware, and secure keys:
1
Connect your USB stick to the control point using a
standard USB A (female) to micro USB cable.
The USB stick is automatically detected.
1
Press
or
to scroll to the one of the following activities:
•
If you want to program a profile from the USB stick
to the transceiver, select
Program Profile
.
•
If you want to read the profile from the transceiver to
the USB stick, select
Read Profile
.
•
If you want to upgrade the transceiver with a
firmware package from the USB stick, select
Upgrade Firmware
.
•
If you want to program secure keys to a transceiver
that has an encryptor module enabled, select
Program Secure Keys
.
1
Do
one
of the following:
•
Press
or
to navigate to the firmware package,
profile, or key set file, press
(
Options
), scroll
to
Open
, then press
(
Select
).
•
Press
or
to navigate to the folder in which you
want to save the profile from the transceiver, then
press
(
Save
).
1
Press
(
Yes
) to confirm that you want to complete the
selected action.
