EN
G
LI
S
H
19
Specifications
31-9460 Hedge trimmer
Cutter bar length
450 mm
Speed
1400 rpm (no load)
Max cutting diameter
14 mm
Noise levels
LpA = 77.5 dB(A), K = 3 dB(A)
LwA = 92.4 dB(A), K = 3 dB(A)
Vibration level
1.79 m/s², K = 1.5 m/s²
Weight
3.3 kg (without battery)
Max telescopic shaft length
2.95 m
31-9461 Pole saw
Guide bar length
18 cm
Saw chain speed
5.5 m/s
Oil tank, volume
80 ml
Noise levels
LpA = 79.5 dB(A), K = 3 dB(A)
LwA = 94 dB(A), K = 3 dB(A)
Vibration level
1.79 m/s², K = 1.5 m/s²
Weight
3.3 kg (without battery)
Saw chain pitch
3/8
″
, number of links 33, appropriate file Ø 4.0 mm
Length
194−270 cm
Vibration
• The measurement of the vibration emission level (triaxial vector sum) and the noise
level values declared in this instruction manual have been carried out in accordance
with a standardised test method described in EN 50636-2-91 and can be used for
comparing one power tool with another.
• The measurement method may also be used for a preliminary assessment of
vibration exposure.
• The declared vibration emission level applies when the power tool is used in
accordance with this instruction manual. If however, the power tool is used for
other purposes and with other accessories or has not been properly maintained,
the vibration emission level could increase significantly over the total working period.
• For an exact assessment of the vibration exposure, the times when the tool is
switched off or running idle should also be taken into account. This significantly
reduces the vibration exposure over the total working period. Decide upon safety
measures to protect the operator from the effects of vibration during all types of use.
