Scan this code
or search for
Cocoon Connect
Only remove battery tabs or plug in sensor when beginning to connect
that device
Follow steps 4 - 6 for each device you want to set up
ONLY TURN ON ONE DEVICE AT A TIME
The LED on each of the Smart Security Devices should be
flashing twice per second
If not, press the Reset Button on the device and hold for six
seconds. The LED should now flash twice per second
Before you begin, make sure you have:
1.
A mobile device - Android (V4.1 or later) or iOS (V8 or later)
2.
Each of your Security Sensors
3.
A Wi-Fi connection (have the password handy)
4.
Download the Cocoon Connect app
For detailed instructions and videos, visit www.cocoonproducts.com.au
First time users:
Register an account and follow the remaining prompts on screen
3. Connect One device
at a Time
4. Begin pairing mode
1. BEFORE YOU START
2. App Setup
