Page 6
For technical questions, please call 1-888-866-5797.
Item 69654
Mounting
1. Adjust the Camera to the desired angle:
a. Remove adhesive pad and insert
a screwdriver (sold separately)
into the center of the Camera
Base and loosen the bolt.
b. Adjust the angle of the Camera,
then tighten the bolt.
c. Replace the adhesive pad.
Camera Base
Note:
The adhesive pad can be used
instead of the screws for indoor locations.
Do not use adhesive pad to mount
outdoors, it is not weatherproof.
2. Mount the Camera to the chosen
location, using the three included
Screws through the three holes
in the Camera Base.
Camera
Screws
Camera Base
WARNING! TO PREVENT
SERIOUS INJURY:
Check for
hidden wiring before securing.
